SPECIFICATIONS |
Preheating Zones |
PRE-HEATING TYPE |
IR Forced Air Convection |
PRE-HEAT HEATER |
220VAC 4KWX6 |
220VAC 650WX36 |
HOT AIR MOTOR |
110W AC220V |
SPEED ADJUSTING METHOD |
Stepless Inverter |
NO. OF PREHEATING ZONES |
3 |
LENGTH OF PREHEATING ZONE |
1800MM |
PREHEATING TEMPERATURE |
Room Temp. ˜250°C |
WARM-UP TIME |
Approx.: 15 Min. |
PREHEATING CONTROL METHOD |
PID+SSR |
THERMAL COMPENSATION POWER |
400WX2 |
| Solder Pot Options |
TYPE OF SOLDER POT
|
Electromagnetic Pump |
Motor Pump |
HEATER POWER |
220VAC 10KW |
380VAC 12KW |
SOLDER CAPACITY |
550KG |
650KG |
MAX. SOLDER POT TEMP. |
MAX: 300° |
TEMP. CONTROL METHOD |
PID+SSR |
WAVE DRIVING POWER |
2KW 220VAC |
1/2HPX23P380VAC |
WAVE HEIGHT ADJUSTING METOD |
Simulation Adjustment |
Inverter Adjustment |
WARM UP TIME |
Around 180 Min (Setting Temp.: 250°C) |
| Conveyor |
PCB CONVEYING SPEED |
0˜2M/MIN |
CONVEYOR SPEED |
0˜78in/min) |
CONVEYOR HEIGHT IN ENTRANCE |
750±20mm (Option: 900 ± 20mm) |
CONVEYOR ANGLE ADJUSTABLE |
4˜7° |
CONVEYOR MOTOR POWER |
90W 3P 220VAC |
SPEED ADJUSTING METHOD |
Inverter |
General |
DIMENSIONS (LxWxH) |
4376x1620x1710 (mm) / 172x64x67 (in) |
PCB CONVEYING DIRECTION |
L to R |
R to L (Option) |
POWER SUPPLY |
3P5W, 380VAC, 50/60Hz(For Electromagnetic Pot: only 50Hz), 63A |
OPTION |
3P5W, 220VAC, 50/60Hz(For Electromagnetic Pot: only 50Hz), 63A |
REQUESTED POWER |
80KW/83KW |
AIR SOURCE |
0.5MPa |
WEIGHT |
Approx.: 2300KG / 4400LBS. |
| Electrical Control |
TOTAL POWER
|
34KW |
NORMAL RUNNING POWER |
<14KW |
CONTROL METHOD |
IBM Computer + PLC |
INSIDE COOLING SYSTEM |
1.5KW 380VAC |
| Nitrogen Unit (Option) |
Nitrogen Consumption |
25M 3/h 500ppm |
Nitrogen Source Pressure |
0.5˜0.8MPA |
