| |
| View All Soldering Accessories | |
|
QUALITEK 376D SELF-FEEDER LEAD FREE SOLDERING STATION
• High frequency heating, rapid heating and quick thermal recovery for lead free soldering. Many types of tips are available and are easy to replace.
• Micro computer control; Temperature calibrates digitally; Temperature set by keys; Auto sleeping available.
• Auto and manual ways of solder feeding optional, auto solder feeding mode can solder nine successive soldering points.
• Imported motor, automatic feeding, sliding switch design. More functions available and adjustable, such as feeding speed, feeding volume, interval time, backing time etc.
• Two types of feeding hose optional, easy to use. Long hose suitable for active soldering. Short hose suitable for fixed soldering.
• Exclusively designed for lead free soldering.
• Optional pedal or manula switch.
| 376D Self Feed Lead Free Soldering Station Specs |
|
|
QUALITEK 203/H ESD - 204/H ESD - CE Approved
• Will reach 300°C from room temperature in 20 seconds.
• Effectively avoids negative impact by cold soldering.
• Relatively lower temperature will largely prolong the life of soldering tips.
• Temperature will lower to 200°C when not in use for 20 minutes and auto idle mode is energy-efficient.
• The tip temperature can be password protected ensuring a consistent soldering temperature.
• Tip design reduces operating cost.
| Qualitek 203/H - 204/H Specifications |
|
|
QUALITEK GT33Q LEAD FREE SOLDERING STATION
• It's Efficient - A wide variety of tips are available to fit the soldering application.
• Auto compensation power to tip size.
• Auto idle prolongs the life of the soldering tips.
• Reaches a temperature of 300°C/570°F within 20 seconds.
• It's Economical - Priced lower than competitive models.
• New tip design reduces operating cost.
• It's Intelligent - calculates and matches power to tip size. • Idle mode reduces heat when iron is not in use. Unit will idle after 20 minutes and completely shut down when not in use for 40 minutes.
• The tip temperature can be password protected ensuring a consisten soldering temperature.
| Qualitek Lead Free Soldering Station GT33Q Specifications |
|
|
QUALITEK 303 LEAD FREE SOLDERING STATION
• The digital temperature sensor is set on the front surface of the soldering tip, so it can check and control the temperature instantaneously for easy calibration and rapid thermal recovery.
• Large LDC screen design, enhances visibility of important parameters that may be seen clearly and calibrated accurately. Displays two temperatures.
• The temperature range may be set accordingly and if the temperature exceeds the limit, the unit will sound an alarm. Password protected temperature may be locked for consistency and assurance.
• Safe and reliable grounding method avoids changes of tip-to-ground resistance and tip-to-ground potential during the soldering process.
• Reduce cost of replacement parts with seperature design of heater and soldering tips.
• Auto idle and shut down times may be preset.
• Up to 64 units may be connected to the same computer simultaneously monitoring and managing the data in real-time, greatly improving the work efficiency and soldering quality. Improves group management.
| Qualitek 303 Specifications |
|
|
QUALITEK 989ESD SMD HOT TWEEZER
• ESD safe by design
• Twin-tube heating contacting the components directly without affecting the adjacent components.
• Especially suitable for rework on component-densely mounted circuit boards.
• Adaptable to several types of soldering stations, remove flake resistor and condenser and SOP elements safely.
| Qualitek 989ESD SMD Hot Tweezer Specifications | |
|
QUALITEK 936 ESD - CE Approved
• Imported creamic heater with extended, service life.
• Separate design of handle and station.
| Qualitek 936 Specifications |
|
